matomo

Special Offer: Save $144 on our annual subscription
Disconnected

New VPN server in USA: Welcome New York!

David Wibergh, about Announcements

We're happy to announce that we have a VPN server in New York now. Which means that OVPN currently has VPN servers in three major US cities: Los Angeles, Miami and now New York.

As always, our VPN server is physically owned by us and contains zero hard drives, is completely log free and has the same security features as in all of OVPN's datacenters.

Accessing the VPN server in New York, USA

There are a couple of different ways to connect to the VPN server in New York.

Desktop client

As old server lists may be cached from before the servers were launched, please note that you might be required to manually log out and log in again to load the new server list. If you have yet to install the OVPN Desktop client, you can get started here.

  • Login to the OVPN Desktop client
  • Option 1: Choose "Select best server in USA" in the first drop-down menu and press connect.
  • Option 2: Choose "Select server manually". Select the new server in New York in the server list and press connect.

OpenVPN GUI and third party systems
To connect with OpenVPN GUI, Tunnelblick, Viscosity or any other third party VPN client, new configuration files for the New York have been made available in each of their guides. Simply select your corresponding setup guide here and follow the steps.

Data center & server specifications

We're currently renting 1U in Equinix's data center on 275 Hartz Way. As of now, we have a 1 Gbit/s uplink to M247. Our peering capabilities are Cogent, NTT, DE-CIX New York, Telia, Telecom Italia, Tata & Level3.

As soon as we get close to reaching the max capacity of the server, we will make sure to send additional servers in order to continue delivering great speeds to our customers.

The server in the rack is of model Dell EMC PowerEdge R230 and is equipped with an Intel® Xeon® E3-1220v6 3.5 GHz processor, 8 GB RAM and 2x1 GbE Intel NICs. Just like in all other datacenters, the server operates without any hard drives or any other form of permanent storage.

Picture of the server

Our previous solution was to co-locate three VPN servers and a switch per data center. That approach turned out to be too expensive as we needed to rent 10 height units in a rack as well as purchase the needed  hardware. We have modified our deployment setup, so we only need to co-locate one server, without reducing any of our security requirements.

David Wibergh